How to clean tile seams from dirt, grease, grout and tile glue

Ceramic tiles - one of the most popular building materials for cladding. It can be used in rooms with a high level of humidity - in the bathroom, on the kitchen working surface or as a floor covering.

How to remove tile adhesive

There are many ways to remove adhesive from tiles. It is necessary to clear a tile until the moment when glue has not stiffened. The hardened solution is harder to clean. Who is engaged in laying ceramic tiles, knows that you can clean it with a wet cloth after installing the coating.

Liquid glue

After laying the tiles, traces of mortar remain, but they are quickly removed.

  1. Take a construction grater. Keep the tool upright.
  2. Move diagonally, so as not to hurt the solution in the seams.
  3. Do not use force. Scratches from the instrument will remain.
  4. If it is difficult to remove the solution, it can be pre-wetted.
  5. Dried glue can be removed with a damp cloth or sponge.

Tips did not help? Use a dry, coarse cloth.

Frozen glue

It is more difficult to remove the frozen glue. In this case, the use of chemicals and physical strength is allowed.

  1. Use a damp cloth to clean the tile from dust.
  2. Apply specialized chemistry for cleaning glue on a sponge. To process the polluted place.
  3. The glue should soften. Waiting time can be found in the instructions attached to the chemical.
  4. Wash off with water.

For reliability get a cleansing agent of the same brand as the glue. Tiles can be difficult to clean with chemicals, sometimes they are not suitable for some types of coverage.

When you need to remove the frozen glue after dismantling, use the tools: grinder, hammer, chisel. Standard actions:

  1. The sharp side of the chisel is applied to the surface closer to the glue border.
  2. The tool is moved smoothly forward, striking the blunt side.
  3. The glue residues are moistened with a solvent. Plaque cleaned with a stiff brush.
  4. Then the pottery is washed.

You can clean the glue with a plastic spatula. The tool does not damage the tile and guarantees a result.

  1. Glue soften with water, solvent.
  2. Then scraped.
  3. The procedure is repeated until the entire solution is removed.
  4. In some cases, construction pumice may be used.
  5. Wipe cleaned with a cloth.

Folk ways

It is possible to use not only special means, but also national. To do this, use household solutions.

  • Table vinegar. Apply to the stain, react with glue, then remove residue and wash the surface with water. Vinegar can be replaced with citric acid. After use, there is an unpleasant smell, so ventilate the room.
  • Baking soda. Put on a wet sponge, wipe the area with pollution. Do not use force, you can damage the tile, leave traces.
  • White. Softens the glue, so dirt is easier to remove. Wear gloves while working.

Steam cleaner can easily remove the dried solution. Steam removes other dirt on the tile.

Specialized Chemistry

In the shops you can find various tools that will help in removing stains. They have labels on which the principle of operation is described in detail. Well deal with the problem of substances containing acid. It should be borne in mind that not all preparations are universal - some help remove glue, others only soften it.

Grout removal - simple and effective methods

When finishing the room tiles, do not do without grouting. After that, traces of fugue remain on the surface. The question is how to clean it? Grouting requires attention, but more importantly, the cleaning process of grout residues. If this is neglected, all work will go down the drain.

Fresh grout

The compound for filling the seams begins to set after 10 minutes. It is better to remove the excess immediately, without the use of funds, but only with a damp cloth.

Work should be done carefully, without damaging the seam. If traces of the fugue cannot be washed off the first time, the procedure will need to be repeated again. Wash the rags after each use.

If the composition is not washed immediately, and he froze, use the following method:

  1. A construction grater is taken and contamination removed. At the same time, it is necessary to control the pressure force on the tile, otherwise it is possible to damage the surface.
  2. Remove the stains with a damp cloth or sponge. The fabric must be clean, otherwise additional stains can not be avoided.

Hardened grout

If the fugue has hardened, and it could not be cleared immediately, you will need the help of special chemicals. The product used must contain acid to remove grout, glue, and cement.

To clean the ceramics, the chemistry is applied with a brush on the dried grout and left for a while to soften the dirt. You can then remove the residues. With divorce will help clean running water.

Epoxy Grout

Before applying the epoxy grout all the nuances are studied. During the installation work you need to do everything quickly, because the composition hardens instantly. The finished mixture is made in small quantities. Do not hit the solution on the surface of the cladding.

If the fugue hit the tile, remove it immediately, using epoxy resin reagents. In a day, the pollution will be removed only mechanically, and there is a possibility of damage to the facing material.

Folk ways

It is not always possible to find chemistry that will help clean up pollution quickly. The task of coping with cleaning substances that everyone has in the house. These include:

  • Acid-based products.
  • Means against limescale.

It should be borne in mind that home remedies can also help. Can be used:

  1. A mixture of table vinegar and baking soda, which is mixed in equal proportions until a homogeneous mass.
  2. The composition is applied to the place of pollution and cleaned after 30 minutes with a brush.
  3. Citric acid or vinegar diluted with water. The principle of operation is the same as that of vinegar and soda.

For cleansing of stains use:

  • Water with the addition of white alcohol.
  • Water with the addition of glycerin in proportions of 3 to 1.
  • Water with the addition of ammonia, 1 liter of 1 tsp.

There are many ways to clean the fugues, but it is better not to allow the grout to get onto the cladding. During installation, you can glue the tiles with masking tape, which will protect against possible contamination.

Removing plaque from tiles

The formation of plaque on the tile is not uncommon. Contact with water and detergents leads to this. Questions about cleaning methods are still relevant.

Before you begin to clean the tiles, you need to deal with the causes of the formation of plaque.

The bathroom uses running water, which contains salt and lime. After falling on ceramics, drying out, they leave traces. Accumulating in one place, lime crystals are formed, which are difficult to remove.

Chemicals

Modern chemistry contains substances that quickly react and can cope with pollution in a few minutes.

Housewives choose universal household chemicals that remove plaque, rust, mold. They are suitable for any surface, but it should be borne in mind that some detergents adversely affect the facing material. For example, acrylic tiles do not tolerate solvents and acids, for this purpose it is better to use aerosols and gels.

Effective are: "Komet", "Mr. Muskul", "Domestos" and many others. Do not forget that the acid reacts to the grout and eats away tile.

Folk ways

You can easily remove plaque with improvised means:

  • Lemon. Places of pollution treated with a fresh piece of lemon. You can use citric acid.
  • Soda and vinegar. Baking soda is applied to a piece of cloth and rubbed on problem areas, and vinegar is sprayed on top. After some time, all washed off with clean water.
  • Vinegar. Essence is diluted with water. The solution is sprayed onto the plaque and washed off after 10 minutes.
  • Ammonia. Used as vinegar: diluted in proportions of 1 to 2 with water and applied to pollution.

For safety, wear gloves, protect your eyes, and ventilate the room!

Cleansing fat

Spots of fat - a common situation. Their appearance is inevitable if you cook food daily.

A tile can remain clean and please the eye with radiance for many years, if you follow some rules:

  • Do not use in the work brushes with a hard and metallic pile;
  • In time to wash the tile, immediately after the appearance of the stain;
  • Use for cleaning special tools and scrapers;
  • For gloss use special chemicals.

Fresh spots

Fresh greasy stains are easy to remove with water and detergent. For old spots use strong drugs that require more time to react. The principle of operation is as follows:

  • The tile is wiped with a damp sponge.
  • The composition is applied to the surface for cleaning and left for the time specified in the instructions.
  • Fat is cleaned with a scraper.
  • The detergent is rinsed off with water.

When purchasing household chemicals, be sure to read the instructions. Many substances are not suitable for all types of surfaces.

Special means

For cleaning use domestic and foreign products that can be purchased at hardware stores. Excellent removal of fat "Schumann", "Mr. Muskul" and many other brands. The principle of operation is the same for everyone. It is described in detail by the manufacturer in the instructions on the package.

Folk methods

You can clean the tile using the available tools available in each house:

  • Laundry soap. Cleans and degreases the surface. You will need to lather the sponge well and wipe the place of contamination.
  • Soda. Suitable for old stains. Water is added to the soda to form a paste, applied with a brush to the surface.
  • Butter. Copes with a thick spot. It is applied to the contaminated area and left for 25 minutes. The stain is scrubbed to extinction.
  • Mustard powder. Diluted with water to the consistency of the paste. The composition is applied to the tile and after 20 minutes, wipe with a damp sponge.
  • Baking powder for the dough. It is diluted with water and applied to the lining. Due to the presence of soda and flour, baking powder is an abrasive substance.
  • Alcohol. For old stains suitable alcohol, which is washed off with warm water.

Mold and fungus removal

The appearance of mold and mildew at the joints of the tile is a frequent occurrence. They spoil the appearance of the room and have a detrimental effect on the body. Mold may be formed for the following reasons:

  • Errors in the installation process.
  • Lack of ventilation.
  • Low temperature.
  • High humidity.
  • Constant availability of water.

Mold and fungus appear on the seams between the tiles, in the corners of rooms, at the junction of the walls, between the cabinets. When they are detected, it is worthwhile to treat them with, for example, a primer against a fungus.

Anti-mold used:

  • Chlorine based detergents. Effective disinfect surface. Mold will not appear in the processing areas.
  • Antifungal agents. They have a detrimental effect on mold, fungus, and bacteria.

From scrap materials suitable soda, alcohol, hydrogen peroxide, vinegar. Soda is poured into the container, then the joints are cleaned with a wet toothbrush.

Alcohol-based products are sprayed into places of contamination, and then removed with a sponge.

In some cases, it is difficult to remove the fungus and mold in the following ways, then it is used for mating. To do this, remove the grout with a sharp object, and a new, anti-fungal effect, overwrites the seams. The mixture is applied with a rubber spatula.

Useful tips

Work can be done efficiently and effectively, if you follow the recommendations:

  • Actions to perform gloves, as some substances are aggressive.
  • To begin to clean the bottom and to wipe with a dry cloth to cover the top.
  • If the tile is glossy, it is better not to use a brush with a metallic pile and abrasives to avoid cracks and scratches.
  • To protect the seam is better to use epoxy paint.
  • Before using chemicals, it is necessary to study the instructions for use.
  • It is not enough to clean the surface, you need to dry it.
  • Hydrogen peroxide is suitable for bleaching seams.

Getting rid of dirt on ceramics is not an easy task. It takes a lot of time and effort. To remove the suitable special cleaning agents or improvised means. The most important thing is to do everything right to get rid of problems for a long time.

Watch the video: Best Way To Clean Tiles Grout - 3 Experiments & Comparisons. How To Clean Tiles Grout (October 2019).

Leave Your Comment